MDTools 960 SP1
Applicability: MDTools 960 NW, SA & MDTools 960S.

Issues Resolved:

1.	Design Check command throws error when using separate Through Drill Holes.
2.	Check Bend command does not refresh the Part Model display after updating Drill Depth.
3.	Design Check, Manufacturability Check and Wall Thickness Check commands throws error, when a cavity is fully consumed by another profile.
4.	In Design Check preparation, Coloring message changed to Removing color. 
5.	Machining Chart creates blank Meet List column when using Machining ID.
6.	Insert Undercut - Sun cavities' preview of Undercut does not shift from Port No. 2 to Port No. 3, 4, 5 & 6.
7.	Edit Stamping displays edited preview along with old preview.
8.	Converting stamping text from Cosmetic to Engraving and vice versa is slow.
9.	In Virtual Mode, Outline does not rotate along with the cavity.
10.	Incorrect preview of Footprint Orientation while aligning footprint.
11.	Recommended value of Drill Depth changes for Sun cavity.
12.	When changing faces of cavities with O-ring, the cavity center marks display incorrectly.
13.	Unable to move cavities when specifying negative values.
14.	When creating Auto-Drawing for block having slot with specific Machining Chart settings, error message displays.
15.	When inclining a drill, O-ring groove's orientation is incorrect.
16.	Assembling multiple CAD models more than 12 in a single instance using Assembly Interface, causes instability.
17.	Assembling stacks in multiple instances shows more models than required.
	  	

Date: Jan 04, 2018.