Commands Overview
|
|
|
Creates a block or modifies the block dimensions. |
|
Stretches the block in the specified direction. |
|
Converts block from virtual design to feature design and vice-versa. |
|
Compares two selected manifolds. |
|
Creates a rectangular cutout on the block. |
|
Creates a chamfer on a block edge |
|
|
|
Inserts a cavity or footprint from the library. |
|
Imports a HyDraw schematic and inserts cavities with net information. |
|
Inserts construction ports for Energy Efficient connections |
|
Inserts offset hole in a cavity. |
|
Inserts orifice plug in a cavity. |
|
Inserts mounting holes in the manifold. |
|
Inserts O-ring groove for a cavity. |
|
Inserts component outline for a cavity or footprint. |
|
Inserts undercut in a cavity. |
|
Inserts slot in a cavity.
|
|
|
|
Inserts copy of a cavity or footprint. |
|
Inserts multiple copies of cavities and footprints.
|
|
Edit cavity, slot, undercut and O-ring. |
|
Stretches and tilts a cavity in the specified direction.
|
|
|
|
Adds drill to a cavity. |
|
Adds counterbore to a cavity. |
|
Increases the spot face depth of construction port to flush plug below manifold surface. |
|
Replaces a cavity or footprint with a new cavity or footprint from the library. |
|
Rotates a footprint or a cavity. |
|
Matches the properties of two or more cavities.
|
|
|
|
Moves a cavity or footprint. |
|
Moves multiple cavities or footprints by a specified distance. |
|
Moves a cavity to align with another.
|
|
|
|
Relocates a cavity or footprint to another face. |
|
Swaps the location of two cavities. |
|
Constrains cavities with manifold edge or a cavity. |
|
Suppresses or un-suppresses cavities.
|
|
|
|
Deletes cavities, footprints, undercuts, slots and O-rings. |
|
Deletes component outlines. |
|
Creates connection between specified cavities. |
|
Creates connection between two cavities by inserting an angled hole. |
|
|
|
Creates or modifies engraving text on the block. |
|
Creates multiple copies of engraving text. |
|
Moves a engraving text to align with another. |
|
Reduces drill depth to minimum depth required to make a connection. |
|
Updates precision of location, angle and depth of all cavities. |
|
Generates machining ID for all cavities in the specified format. |
|
Automatically assigns net name and color to all connected cavities in the block. |
|
Manages net visibility and display colors. |
|
|
|
Updates color of cavities. |
|
Removes color from cavities. |
|
Locates and highlights a cavity. |
|
Displays a net and hides all other nets. |
|
|
|
Manages visibility of component ID, machining ID and port name. |
|
Manages visibility of cavity center. |
|
Manages visibility of footprint envelop and component outline. |
|
|
|
Creates consolidated report of design errors. |
|
Checks the block for manufacturing and tooling limitations. |
|
Check Conformance of design to HyDraw® schematic. |
|
Checks the pressure rating of all construction ports. |
|
|
|
Checks wall thickness around cavities. |
|
Measures distance between two surfaces. |
|
Checks connection errors in the block. |
|
Checks connectivity in the block. |
|
Checks velocity in cavities/ports. |
|
Checks quality of intersections for energy efficient bends. |
|
Check connection with three or more cartridge valve side ports to recommended offset. |
|
Creates 2D machining drawing of the block. |
|
|
|
Exports the manifold into MBXML file format. |
|
Imports the manifold from MBXML file. |
|
Creates a shrink-wrapped model. |
|
Sets assembly constraints to a component model. |
|
Displays MDTools® Options dialog box, where you can configure design options. |
|
Displays MDTools License Options dialog box, where you can configure license options. |
|
Displays MDTools user manual. |
|
About MDTools. |
|
Creates six orthogonal views of a manifold or manifold assembly. |
|
Displays or hides internal details of the manifold in each view. |
|
Displays the face origin and X/Y direction of each view. |
|
Displays the top view and direction of angular holes in the 2D drawing. |
|
Displays the port names and footprint envelop in the 2D drawing. |
|
Marks construction ports in the 2D drawing. |
|
Displays a rectangle around all engraving text in the 2D drawing. |
|
Displays the top view of undercuts. |
|
Dimensions cavities in the 2D drawing. |
|
Displays the machining ID for cavities in the 2D drawing. |
|
Displays the component ID, cavity/footprint name for cavities in the 2D drawing. |
|
Creates balloon with cavity machining ID for the cavities in the 2D drawing. |
|
Creates and inserts manifold machining chart into the 2D drawing. |
|
Create machining callout for the cavities in the 2D drawing. |
|
Creates and inserts engraving text chart into the 2D drawing. |
|
Creates and inserts component and port list into the 2D drawing |
|
Creates and inserts cavity list into the 2D drawing |
|
Displays MDTools® License Options dialog box where you can configure license options. |
|
Automatically updates the drawing if the reference manifold of that drawing is modified. |
|
Displays MDTools License Manager dialog box where you can configure license options. |
|
Displays MDTools Drawing Options dialog box where you can configure drawing options. |
|
Displays MDTools user manual. |
|
Interactively assembles components.
|
|
Automatically assembles components and construction plugs.
|
|
Automatically assembles construction plug. |
|
Creates a shrink-wrapped model. |
|
Sets assembly constrains to a component model. |
|
MDTools automatically updates the assembly, if the reference manifold of that assembly is modified. |
|
Displays MDTools License Manager dialog box where you can configure license options. |
|
Displays MDTools user manual. |